|
Hard Surface Deep Cleaning Kit
This kit is excellent for deep cleaning your stone, tile, glass or other hard surfaces to remove stains or hard water deposits. In the kit you get one gallon of HDCLEAN, a bottle of EZCLN, 1/4 liter of Hydrex impregnating sealer for stone, a 12" scraper with 5 blades, 10 single edge razor blades, a roll of masking tape, an epoxy scrubbing sponge, a hydrophilic sponge, a pair of vinyl sleeve protectors, a vinyl apron and 4 pair of heavy duty latex gloves.
Bathe the material in HDCLN Heavy-Duty Hard Surface Cleaner, and after the material has had ample time to sink into the stains or calcium build-up use a wall scraper with a 4” razor blade and scrape the whole surface down, then rinse it clean with water. After rinsing the glass, stone or tile clean apply a second bath of HDCLN and allow it to stand for 5 – 10 minutes. Scrub the surface with the scrubbing sponge and then use the wall scraper again to scrape down the whole surface. After you have finished rinse the whole surface thoroughly and squeegee or wipe it dry.
After successfully cleaning your surface use the EZCLN as a regular cleaner to help prevent the build-up from reoccurring. EZCLN can be used as much as you want to, even daily.
If there is stone involved reseal it with the sealer provided. Be careful with the scraper and the razor blades not to scratch or mar your surface. Many materials, including but not limited to marble, limestone, travertine, corion, etc. can be scratched with a sharp instrument or blade. For these materials use the razor blade by hand to carefully remove scale build-up then use the scrubbing sponge, or if you have any doubts just use the scrubbing sponge. Do not use the scraper over uneven surfaces.
components
- 1 # STTHDCLN-1 - STT HEAVY DUTY CLEANER - 1 GAL
- 1 # STTEZCLNS - STT EASY CLEAN STONE CLEANER CASE - 24 OZ
- 1 # TSH250 - TENAX HYDREX SEALER - 250ML
- 1 # WS12 - 12" X 4" WALL SCRAPER
- 5 # 4WSB - 4" WALL SCRAPER BLADE
- 10 # 13135BLADE - SINGLE EDGE RAZOR BLADE - 1 BLADE
- 1 # 112BMT - 1 1/2"x 60YDS BLUE MASKING TAPE
- 1 # XLESP - EXTRA LARGE EPOXY SPONGE
- 1 # 482XL - 7 1/2 X 5 1/4 X 2 1/2 HYDRA GROUT SPONGE
- 1 # 18BVS - 18" BLUE VINYL SLEEVE- PAIR
- 1 # APRON - EXTRA HEAVY DUTY VINYL APRON
- 4 # 6604PAIR - "THICKSTER" HEAVY DUTY LATEX GLOVES 1 PAIR
Priced individually this will cost you over $150, so we have put the whole kit together and we offer it to you for a substantial discount. Get yours today and get your hard surfaces clean like they were new!
This is a HazMat (hazardous material). There will be additional HazMat fees if this is for delivery outside of the continental USA or if you request the order to be shipped by other means than UPS ground delivery. If any additional fees apply to this order you will be contacted prior to us shipping the order for your approval.
|
